Pico 2 Not Checking in to the Dashboard

[mmassare]

To Duplicate 1) Flash Pico 2 with stable firmware. 2) Add to controller. (This Works) 3) Flash to ng firmware, used open-mesh-flash.exe.

 http://support.open-mesh.com/activekb/questions.php?questionid=35

4) Check Test firmware and click update in controller. 5) Pico 2 will not pull down a config, even if you do a dashboard checkin.

logread shows: Sep 10 18:51:53 5_247_5_113 user.notice checkin: dashboard reply does not have the correct header

[mike]

I tested using a Pico2 here flashed to ng 235 and it worked for me. Could you provide the MAC address you entered and the network name?

[mmassare]

Network name is LAB MAC is 00:15:6d:f6:05:71

[mmassare]

I've migrated to a NanoStation?2 Loco. The same exact issue happens with this device as well. It does have a public IP.

[rspaeth]

Can confirm this problem exists in both r254 and r260. Using Pico2HP, flashed using open-mesh-flash-ng.exe, device does NOT show as having obtained a lease through router.

Curious as to the method to SSH into the unit, as no WAN connection is made and attempts to WLAN fail to issue an IP through DHCP.